Sheet 43/77Products / Industrial safety / Hard hatRev
Industrial safety · catalogue item
Hard hat
Head protection for industrial sites, rated for impact and electrical exposure.
In short
Head protection for industrial sites, rated for impact and electrical exposure. JJ Projects sources it to the specification the buyer names. Typical reference, standards: ANSI/ISEA Z89.1.
Specification references
Typical references only. The governing specification is the one on your purchase order or datasheet.
| Property | Typical reference |
|---|---|
| Standards | ANSI/ISEA Z89.1 |
| Types | Type I (top impact) and Type II (top and lateral impact) |
| Electrical classes | Class G, E or C |
Specification references describe what the order names, not a certification held by JJ Projects.
Industrial safety
Typical uses
- 01Head protection for workers on construction and fabrication sites
- 02Refineries, plants and shutdown or turnaround crews
- 03Visitor and inspector issue at industrial facilities
- 04Work near electrical equipment, using a class chosen for the exposure
What to include in a request
A request with these details can be quoted without a round of questions. Send what you have and we will ask for the rest.
- 01Standard the site requires, for example ANSI/ISEA Z89.1, and the edition if the site names one
- 02Type: Type I for top impact, or Type II for top and lateral impact
- 03Electrical class: G, E or C, chosen for the exposure on site
- 04Suspension: pin-lock or ratchet, and the number of suspension points
- 05Shell colors, brim or full-brim style, and any logo or marking wanted
- 06Accessories: chin straps, sweatbands, face shield or hearing protection mounts, and liners
- 07Quantity and the sizes or adjustment range needed
Industrial safety
Related items
- 01Gas detectorFixed and portable detectors for flammable and toxic gas with ATEX/IECEx or NEC area ratings, and what a request needs: gas, range, alarm levels and area class.Learn more
- 02Industrial two-way radioHandheld VHF and UHF two-way radios for site use, with intrinsically safe versions for classified areas, and what a request needs: band, rating and accessories.Learn more
Guides
Guides
Questions
Questions
01What is the difference between Type I and Type II?
Under ANSI/ISEA Z89.1, Type I helmets are tested for impact to the top of the head. Type II helmets are also tested for impact from the sides, front and back. Your site safety plan decides which type is required.
02What do electrical classes G, E and C mean?
Class G is tested at a lower voltage, class E at a higher voltage, and class C offers no electrical protection. Class C helmets are often vented and should not be worn near energized conductors. Choose the class for the hazard on site.
03Do hard hats expire?
Manufacturers state a service life for the shell and the suspension, and a helmet that has taken a heavy blow or shows cracks or damage must be replaced. Follow the manufacturer's instructions and your site safety rules.
Send the specification. We will take it from there.
A material list, a drawing or a single line: tell us what the project needs and where it is going.